DIY Varsity Jacket

One of the all-time favorite back-to-school looks is going to be hitting the hallways this fall.  And that is the varsity look.

I love this.  It means that the sheer and ratty 70's trend is finally starting to fade away with the cheap dyes that they came in the department stores with.

I mean-- did you notice that too?  I totally cannot see in paying $10 for a kid's t-shirt that is practically threadbare and looks like it was sitting in an old coffee can in my grandparents' toolshed!  Hopefully the varsity trend will welcome back quality-- something that I would gladly pay for-- for a cheap price!

With that being said, A has been noticing the trend too, and has been telling me how she would love to go back to school with a varsity jacket.

Mind you-- it's going to be 90 degrees today, so it's not like I've been sharing her enthusiasm!

I looked online, and it seems that varsity jackets either cost upwards of $100 or they only come in toddler sizes.  I don't know.  Maybe they'll start showing up when stores start bringing in their fall/winter stock.

However, I did manage to find a cheap fix to suffice my always not-so-hard-to-please daughter.  (I totally lucked out with her!)

I came across this varsity style fleece sweatshirt jacket from Old Navy.  It comes in a vintage maroon or black.  And of course, all of the black ones were sold out in the stores within a 50-mile radius, so I ordered one online.

And at first, it kind of looks plain, but when you go to a craft store (and make sure you go to your favorite store's website to print off a coupon), you can pick up one of these iron-on varsity-style letters:

(The pic's kinda crummy, but it's a raised letter with satin puff stitching on a white felt background.)

They're really cheap.  I picked this one up for just $1.99, and when I printed off my coupon, it ended up being just 99 cents.

And so, this is what I did to bring the jacket up a couple notches:

First, you place the jacket on the ironing board and position the letter on an area of the jacket.  (Make sure you keep it straight, so that it doesn't end up being crooked after you iron it on.)

And then, you find a piece of cotton fabric (which is this chevron piece) to cover and protect the letter while you are ironing it on.  Don't use anything else than cotton, because it might run the risk of melting itself onto what you are ironing.)  After ironing the top side, flip the jacket over and place the cotton fabric over the inside and iron as well.  **WARNING  Sometimes metal snaps have a plastic disc that is inserted between the snap and the fabric (to prevent puckering, etc. and to give it a nice, tailored look.  I figured this out while I was going over it with my iron from the inside, thus melting the plastic disc a little bit.  Although no significant damage can be seen-- just be careful not to iron over the snaps like I did!)

And when you make a 99 cent purchase like this, you  might notice that the decal doesn't fasten onto the fabric a full 100%.  Don't worry-- it's a decal.  They're supposed to make you mad!  If they didn't, then it would mean they were professionally fastened by the manufacturer in the first place!  But since it's done at home, you can always go back over it with a sewing machine to make it look nice and prevent it from peeling off.  (Be sure to ask if any additional supplies are needed-- depending on the fabric you're using.  It slips my mind at the moment, but you know how shirts with embroidered decals will have that scratchy bonding paper on the inside of the fabric behind the decal?  (Interfacing?)  It's the stuff that's used to make sure the fabric doesn't get warped and puckered during the sewing process.)

Anyways...

So when you are done, it will end up looking like this:

It's not a really big deal.  Just a cheap fix to update the look a little more.  A laundering tip~  don't throw the jacket/sweatshirt into the dryer after washing, because if you do, you will end up with pilling around the felt, where it will end up looking dingy and eventually fall apart.  My kiddo is really pleased about it, and it's something lightweight that will work when she goes back to school this fall.

Hope this inspires you!

Crocheting As A Form of Meditation

It's amazing how a crisis-- a severe one-- can put one's life into perspective, and make you realize how truly thankful you should be for what you have.

This year, we've faced many hurdles.  My husband has been trying to get a better job, so that I could return to school, and eventually get something going of my own.  On top of that, we received news that my husband's health had declined to the point where dialysis would be eminent by the end of the year.

And dealing with that-- and the finances, lack of family, etc., it's been a hard burden to carry around.  And unfortunately for my husband, he has a wife, who will panic and think the worst all of the time!

So, I tried one of those online meditation programs that one talk show lady and her friend were doing.

That sooooo did not work.  Her friend would talk about relaxing and having your mind go blank.  Instead, I ended up thinking how long I had left until he rang the bell, the laundry I needed to put in the dryer-- or when my husband would come in the room, see what I was doing, and laugh!

That was when I noticed a friend of mine, posting some things that she had crocheted on her Facebook page.

She ended up spending a couple hours, teaching me the basic chain and single crochet stitch.  And I've been hooked ever since.

(Ha, ha.  I just noticed the pun!)

Crocheting does two things that soothes a constant worrier like myself.  1.  It relaxes me.  2.  I am doing something productive while I am relaxing.

So for the past few months, I've been working on a couple of blankets and scarves.  (Infinity scarves!  It's just such a neat hobby to get into!)

And I realized that as I go, that I can make other things as well.  (Like a beanie.)

It's just neat to count by 10's, relax, and watch your stress be converted into something of use!

Anyways...

I just wanted to say what I've been up to, and suggest it to any of those who are trying to look for a way to relax, and for the same reasons I have, haven't been able to.

Look up the directions on YouTube.  They have some great tutorials.  It seems intimidating at first, but once you get the hang of it, you'll be like "ohhhhhhhhhh...  I get it"! 

~Ps.  Thankfully, we received great news on my husband's kidney front, where his levels "miraculously" went up enough to place him back into Stage 3! :)

That Oatmeal Hairband Holder I Keep Seeing On Pinterest...

It's a sad thing, when you feel that you have to hand over the ethernet cord to your husband, as he leaves the house.  Yes.  I've spent waaaay too much time on Pinterest, and have over 11,000 pins during the past year to show for it.  (It's some kind of OCD thing with me.  I get on a theme, and end up scouring for things to go on the board.)

With that said, I did manage to get some things done around the house.  Although I procrastinated a little bit, and worked on this little project instead.

I had some leftover fabric from the pillowcase dress that I made a couple months ago, and thought it would have a nice contrast with the little hairbands laying around.

This project takes about 20 minutes.

You'll need:

• Quilt batting.  I keep seeing other sites using just fabric or paper just glued to the oatmeal container, but I think the batting gives something for the bands to grab onto, so they won't slide off.
• The oatmeal container, of course.  (The large-sized container.)
• Fabric and other decorations.  (I started with the satin ribbon, but it kind of looked warped with the glue, so I ended up using a thicker grosgrain (I believe it's called) ribbon.)
• Cardboard-- as in the kind that comes from a box.
• Glue gun

So first off, what you need to do, is cut the batting and glue it to the container.  Keep in mind, that the lid will need to close, so you shouldn't go rogue and tack it over the edge and whatnot, because then the lid won't close.

Next, cut your fabric, making sure you allow between 1/2"-1" extra, to fold under at the bottom.

After that, start gluing the fabric around the container, keeping it taut around the top edge of the container.  (Taut, because you don't want it peeling off whenever the you put the lid on and off.)  

Unfortunately, the leftover fabric that I had, barely wrapped around the box, so I had to improvise.  (See below.)  But you have to realize, it's an oatmeal container, so it doesn't have to be perfect.  (Says the perfectionist in me, that's still having a little problem with this, lol.)

And as you can see, I've had to do a little tack-sewing with this.  At first, I tried gluing the ends of the fabric together, where they met.  But I had to take it off, because the glue gun was leaving too many bumps of glue behind.  

Afterward, I took a strip of leftover fabric, and made a band, to cover that mess.  (Hopefully, you'll have more than enough fabric to not have to do this.  But in the event that you too, either didn't have enough, or mismeasured...)  And if you notice, I am actually using a hair straightener to iron down the edges of this strip.  (So convenient, when you don't want to drag out the iron for something as little as this.) 

So you after you do that, you need to glue the bottom edge on the inside~

To give the bottom a nicer 'tailored' look, cut out a circle from a piece of cardboard.  Cover it with fabric, gluing it to the underside.  Afterward, apply some glue to the bottom of the container, and push the circle in to fit~

Now, to the lid.  Like the pins I've been seeing for this project, I was hoping to just deal with a clear plastic lid.  Nope!  I don't know if it was just cheaper to do that way, or if it was something they decided, based on ecological data.  But the container lid is just a ring with paper in it!  (You might have better luck with a different brand's container.)  But with that said, cut out a circle, and glue it right on top of the Quaker Man's face~

And when you're done, you can add extras-- like the ribbon that I did below.  (Mind you, I could have done more, but I have to realize that it's just an oatmeal container!)

And when you're all done, it looks like this!  

I Think I've Got This Pillowcase Dress Thing Down!

Okay.  Let's get something straight~

I don't sew!

I try to act like I can, but when stitching on bias tape doesn't end up going through onto the other side, I get frustrated.

(Especially when I realize that I set the tension too high, when I'm trying to pull it all out with a seam ripper!)

Being that I haven't sewn anything (other than hemming a pantleg or something) in over 15 years, I wanted my first project to be simple.

As in-- I'm-not-going-to-deal-with-a-pattern kind of simple.

I started looking up these pillowcase dresses that I've been seeing, on Pinterest.  (If you look up the damask ones, you'll find absolutely gorgeous ones!)  

So of course, I ended up getting the fabric and the ribbon, necessary to make one of these things for my 7 year old.

As it has been sitting for the past month and a half, I've been mulling over how to construct one of those things.  (I have a bad habit of jumping into something-- that I know nothing about-- and end up botching it up somehow!)

So today-- in the 85 degree heat (which is uncommon here in Oregon at this time of year), I decided to pull out my sewing machine, and see what I could come up with.

It's just a guide on how to make one.  It takes about 45 minutes to do, because you just cut it out, sew up the sides, add the bias tape, make a hem on the bottom, make a hem on the top, and then roll some ribbon through.

First, I used a pillowcase to trace around two layers of fabric.  Since I don't know about those special pencils that you're supposed to use, I just used chalk~

When you're done tracing, you are left with this~

Cut it out~

Then fold it in half, lengthwise~

On the cut edge, make your armholes.  An easy way to get it right, is use a tea box (or something similar), and round the corners once they're traced~

Unfold it, and you should be left with this~

Reverse it to the wrong side like this~

And then, you're ready to start sewing.  Stitch up the sides and stop when you reach the armholes.  Like I said, I didn't follow a pattern, so use a seam allowance that is comfortable for you~

When you are finished, you have a choice about how you want to do the bottom of the dress.  You can either roll the bottom up twice and make a hem, or you can do it the EASY way, and sew on some bias tape.  The dress below depicts folding it up and making a hem.  (I apologize for the steps getting a little blurry.  I got distracted by my 7 year old wanting lunch, and an old Hazel episode.)~

I measured about 1cm and ironing on the first fold...

...and then folding it up again 2cm.

Start stitching across the end of your hem.  And then you've got the bottom part done~

Next, add your bias tape along the armholes.  (If you don't know how to do bias tape, refer to the post prior to this one-- I'll tell you how to make your own!)

Now, do the same exact thing to the top of the dress that you did at the bottom, leaving the ends open, to slip the ribbon through.  With the unfinished edge at the top, fold and iron about 1cm, and then what I did with this, is fold and stitch another 3cm-- which gives just enough room for the ribbon.

The ribbon can be ran two ways: 1) slip one ribbon through the back, then one through the front, where they will end up being tied into two bows.  2)  run one ribbon through the back, pull it through, and have it run through the front.  Then tie the ends together for a bow that ties on the side.

After that's all done, string your ribbon through, and voila!  You're done!

Mind you, this was just a test run, to see if I could do it or not.  As you can see, I did go a little too short, where it ends up a blouse.  (And the clashing ribbon doesn't help much either.)  But it's easy enough to where I can confidently start on the nicer fabric; knowing what I need to do now!

**Update

I decided to go ahead and use the damask today as well.  (ERG!  It looks like a nightgown!)  So be careful how you measure.  (My mistake was changing my mind from a hem at the bottom, to just adding bias tape-- without making the proper adjustment cuts to it.  Oh well.  It will fit next year!)

***Update

NOW   I've got it down!

How To Make Bias Tape

I am a novice seamstress.  So on a project (that I decided to on a whim today-- because slaving over a sewing machine on an 85 degree day made so much sense), I realized that I needed some bias tape to finish up an armhole.

What is bias tape?  It's not actually tape but more rather a finishing trim, when you don't feel like spending the entire day sewing (and then ripping apart 20 times) fancy techniques for a well-tailored edge.  It works great on armholes, for trim, etc.

It's called bias, because unlike the straight up and down/left to right weave that your fabric has, it is cut on the diagonal.  This diagonal cut, allows it to stretch, and therefore, become workable as you finish your curved edge.

So when you're working on a project, and realize that you need some, what do you do?  You make it from scratch.  

And if you barely have any sewing experience-- like myself, you'll be surprised how easy it is to do.  Honestly, it's not intimidating at all. 

First of all, you get the fabric that you want to make the tape out of.  Since you will be cutting out a strip, folding it in half, and then folding the halves again, make sure it's wide enough for your project.  (For example, a 1 1/2" strip that you cut out, will end up being about 3/8" of an inch when it's finished!)

So with that said, cut out your desired length strip~

I am just totally eyeballing it with a ruler as my guide, but obviously you can measure it and cut it according to how you do your project.  And there's no need to mind the jagged edges, because those are going to be folded inwards and out of sight anyways.

Fold the strip in half, and iron~

After that, fold one half inward, and iron again.  (Do the same for the other side.)~

When you're done, it should look like this~

After that, start sewing it onto your project.  

Word of warning though, make sure that your stitch is also going through the other side of the bias tape!  After I'm done posting this, I'm going to have to go back and rip out the trim from a pillowcase dress that I'm making for my daughter.  (Not fun, since this is the first time I've really sewn anything in over a decade, and didn't realize that there was too much tension on the machine!)

Anyways...

But that is how you make your own bias tape.  Hopefully, the directions are not too confusing!

Happy sewing!